Among many hot melt adhesive products, hot melt adhesive mesh films, which are used for composite of the same or different media, have superior bonding performance. There are many manufacturers of hot melt adhesive mesh films on the market, and they can produce different types of adhesives according to the needs of the users. For demanders, there are many issues to pay more attention to, both in terms of purchasing and application, in order to make the product's composite effect play a better role. When applying hot melt adhesive mesh for composite, what details should be considered? 1. Choose the right type There are many types of hot melt adhesive mesh manufacturers that can produce, and there are certain differences in the adhesive properties applied when using them to composite different types of media. Therefore, when choosing such products, it is important to consider comprehensively factors such as adhesive strength and the materials that can be applied. Only when the selected type of membrane is more closely aligned with the material that needs to be bonded, can the final bonding effect be better. 2. Prepare the bonding surface properly After the production of hot melt adhesive mesh film, users need to first treat the composite interface before using the adhesive film for composite. If there are stains or serious unevenness in the area to be bonded, the overall adhesion will naturally be affected. Therefore, it is important to do a good job in the pre-treatment of the surface to be composite before composite. 3. Control the bonding temperature and time well There are certain differences in the corresponding bonding temperature when applying different types of hot melt adhesive mesh films. Technicians from hot melt adhesive mesh manufacturers have stated that when using different types of mesh for composite purposes, if the temperature is too low, it can lead to insufficient melting and poor bonding performance. And if the temperature is too high, it can also lead to a lack of glue in the entire omental layer, resulting in a decrease in adhesion. It is important to pay attention to temperature control when applying hot melt adhesive mesh in practical applications.
